We have created a awesome theme
Far far away,behind the word mountains, far from the countries
PRODUCT > 대기 측정기기
| Measurement methods | NOx : NDIR SO2 : NDIR CO : NDIR CO2 : NDIR O2 : Magneto-pneumatic detection |
|---|---|
| Measurement range | NOx : 200~5000 ppm SO2 : 200~5000 ppm CO : 200~5000 ppm CO2 : 5~25 vol% O2 : 10~25 vol% |
| Repeatability | Within 0.5% of full scale (with optional range, or during O2 measurement, ±1.0% of full scale) |
| Linearity (indicator error) | ±1.0% of full scale |
| Zero drift | ±1.0% of full scale (assuming surrounding temperature is maintained within 5 °C) (with optional range, or O2 measurement, ±2.0% of full scale) |
| Span drift | ±2.0% of full scale/week (assuming surrounding temperature is maintained within 5°) |
| Response time | Within 60 seconds (Td + T90 from equipment intake area) (sample flow 0.6 L/min.) (within 240 seconds for SO2 only) |
| Overall interference from co-existing gases | ±2.0% of full scale/week (within standard range, with standard gas formation) |
| Display | Touch panel LCD (backlight) (four usable lines) |
| Environment Condition | Temperature : -5 to 40 °C (away from direct sunlight and radiation heat) Humidity : 85% or less (no condensation) Vibration : 100 Hz, 0.3 m/S2 or less Dust : Standard environment or better |
| Measuring Gas Condition | Temperature : 250 °C or lower Dust : 0.1 g/Nm3 or less Standard gas composition : NO: 500 ppm or less; NO2: 15 ppm or less; SO2: 1000 ppm or less; SO3: 50 ppm or less;CO: 200 ppm or less; CO2: 15% volume or less; H2O: 40% volume or less |
| Air Flow Rate | Operator adjustable and nominally about 200mL/min |
| Sample Temperature | 5°C to 50°C |
| Carrier Gas | Hydrocarbon and CO2 free air at 2-6 bar |
| Ambient Temperature | between 5°C and 50°C is good for proper operation |
| Waste Liquid Disposal | achieved automatically by peristaltic pump |
| Fluid Flow Controls | fluid flow for accurate and repeatable injection is achieved through 3 peristaltic pumps plus a 6-port solenoid driven valve |
| Compliance with Korea Environmtent Corporation | Standard for Communications of Continous Automatic Measuring Instrument (=TMS) Comply with the total organic carbon performance test method |
| Standard Data Output | TCP/IP |
| Digital Output | RS232 |
| Analog Output | 0-5VDC(option), 4-20 mA analog output |
| Dimensions | 600(W)x550(D)x1600(H) |
| Power Requirement | 230 VAC 50/60 Hz; 1200VA |
